fw. upgrade MMI 3G possible ?

Discussion in 'MMI' started by Igi, Jul 22, 2010.

  1. destroi35 Member

    Can you please tell me how to erase it?
  2. Advertisement

  3. a4ss4abt Active Member

  4. betina New Member

    Good afternoon.
    Cars A6 C7 2011 onwards
    After replacing the MMI Radio plus on the MMI Navigation plus with MMI touch and installing BOSE Surround Sound, errors are, installed maps in 2012

    Address 56: Cassette (R) Label: 4F0-035-0xx-56.clb
    Part No SW: 4G1 035 053 C HW: 4G1 035 053
    Component: Radio U Basic H41 0079
    Revision: AB001007 Serial number: 049JX0B7500119
    Coding: 010003010100000000
    Shop #: WSC 12345 123 12 345
    VCID: 1F461F650EA6FDB

    A problem:
    03 175 - Invalid set of data
    000 -
    Freeze frame:
    Status of fault: 01100000
    Priority fault: 4
    The frequency of errors: 1
    Index of forgetting: 167
    Mileage: 7262 km
    Countdown: 0
    Date: 2012.04.07
    Time: 14:09:29

    Freeze frame:
    Voltage: 11.70 V
    Bin.bity: 00000000 00000001

    -------------------------------------------------- -----------------------------
    Address 5F: Electronic information (J794) Label: 4E0-035-6xx-5F.clb
    Part No SW: 4G0 035 670 G HW: 4G0 035 670 A
    Component: H-BNT-EU H48 0484
    Revision: -------- Serial Number: 428BU0C7542126
    Encoding: 050100000003E1ED45008B1E00000001000001000100000002
    Shop #: WSC 00000 000 00 000
    VCID: 2756078556F635B

    Partition 1 - Part No: 8R0 060 884 AH
    Component: EUR 2012 1308

    Partition 2 - Part No SW: 4G0 919 605 A HW: 4G0 919 605 A
    Component: DU8 C7 SV H42 0021

    Subsystem 3 - Part No SW: 4G1 919 612 C HW: 4G1 919 612 C
    Component: E380 BDT C7 H08 0102

    Subsystem 4 - Part No: 8R0 060 961 C
    Component: CD-Database 3638

    2 Faults Found:
    03 175 - Invalid set of data
    000 -
    Freeze frame:
    Status of fault: 01100000
    Priority fault: 2
    The frequency of errors: 1
    Index of forgetting: 167
    Mileage: 7262 km
    Countdown: 0
    Date: 2012.04.07
    Time: 14:25:33

    Freeze frame:
    Voltage: 11.90 V

    03623 - Wrong unlock code
    000 -
    Freeze frame:
    Status of fault: 01100000
    Priority fault: 6
    The frequency of errors: 1
    Index of forgetting: 167
    Mileage: 7262 km
    Countdown: 0
    Date: 2012.04.07
    Time: 14:25:33

    Freeze frame:
    Hex value: 0x0004
    Hex value: 0x0003
    Score: 7
    Is there any solution for this problem?
    Best regards, Sergey.
  5. ForestML Member

    Your navi working? Because I think your navi is activated for different VIN.
  6. betina New Member

    Yes it works, and navigation and Bose. Only concerned about the error.
  7. ForestML Member

    And how was maps updated and activated, officialy?
  8. betina New Member

    Maps installed during installation. Audi dealer is not installed, but removed the protection komplnentov dealer. After a vag com found errors.
  9. ForestML Member

    so I as wrote: 03623 - Wrong unlock code is related for Activation, I think your 5F was activated for another VIN
  10. betina New Member

    I think 5F can be activated only on one car.
    If there was a problem with the wine in my car, he would not have worked. And about the error is not clear.
  11. a4ss4abt Active Member

    Those errors should be corrected by an Audi Dealer applying an SWM action on line with the Audi Server.
    But if you have retrofitted those units by yourself I think it will be very difficult they accept them.
    Good luck.
  12. betina New Member

    With a factory Navi and Bose has not been established. All this set the Audi dealer when buying a car, but with the existing errors.
  13. a4ss4abt Active Member

    Sorry but I'm not sure to understand...are you saying that the Mods have been done by the Dealer? If yes he has to do the SWM as said before....please read my post on the previous page of this thread.
  14. betina New Member

    Thank you.
    Maybe the dealer did not properly made ‚Äč‚Äčencoding and deprotection.
  15. betina New Member

    Good afternoon.
    Where can I find information on the coding and adaptation unit 5F?
  16. betina New Member

    Error 03175 in the radio and unit 5F, probably arises from the mismatch and hence the production date of the software.
    On the radio etka 4G1035053C produced with 30.05.2011-07.11.2011 and box 5F 4G0035670G with 07.11.2011-16.04.2012. In my case it is necessary to use the radio 4G1035053E. My reasoning is correct?
  17. a4ss4abt Active Member

    I'm sorry but as i already said that error doesn't depend from the version of the Radio or 5F. Only a correct SWM action with a complete reparameterization on-line with Audi can erase it. If your Dealer did those mods now it should correct all the errors.
    But did you ask him or not?
  18. betina New Member

    The dealer can not give an explanation. If the plant was not Navi and Bose, is it possible to correct the connection to SWM action with a complete reparameterization on-line with Audi?
  19. a4ss4abt Active Member

    Everything is possible but the rules that Audi preview in these cases are always the same: the car must be untouched....in others words no modification have to be done and there you have replaced the 5F and added the Bose. If the Work has been done by an official Audi Service using new parts under warranty I cannot believe they don't ask a code to regularize the new situation.
  20. betina New Member

    In Russia, until such dealer has not yet doschel. So for me it is probably from the realm of fantasy.
  21. pindour New Member

    Hi, I wanted to update mmi3g+ in A8 (2010) update CD AM (ver 485), the car is a version of 078, when you start the update MMI says:
    "Update fuhrt zu korrupt sw modulen (the update software will damage the module)"
    Problem with module GEMMI.
    Can you please help?
    Thanks

Share Audi Forum with friends