AMI audio connection

Discussion in 'Multimedia' started by pokrovsky, Feb 17, 2015.

  1. pokrovsky Member

    i got an AMI unit from an R8 (came without any harness) and I built my harness myself. I found all the necessary information here on this site but one question remains slightly unclear. Do the 3 audio wires from AMI that go to 32 pin connection at the back if RNS-E connect to NF-in or AUX NF-in?

    Thanks very much!
  2. Advertisement

    • Premium Supporter

    AudiA4B6US Super Moderator

  3. pokrovsky Member

    Thanks very much!
    AMI retrofit shouldn't have any effect on previous SAT installation, right? For some reason my Sirius/XM module went into limbo saying "this vehicle is equipped for a simplified installation of satellite radio..."
    Need to verify wiring but I'm pretty sure everything is connected correctly
    • Premium Supporter

    AudiA4B6US Super Moderator

    SAT audio goes to the CD changer audio-in on the RNS-E, so no change when adding AMI. But if you mess up the CAN wires then you would get that message. It sounds like the RNS-E is coded for SAT radio but it cannot see the SAT receiver. over CAN anymore.

Share Audi Forum with friends