![]() |
|
|
#1 (permalink) |
|
Junior Member
I drive a4
Joined: May 2010
From: London
Posts: 11
|
Hi,
Hope someone can help here. I have 2002 AUdi A4, I have installed an RNS-E unit in it. I have now purchased an OEM Bluetooth unit, Part No: 8P0 862 335 Q Unfortunately the cable that came with it is not plug and play. Can someone confirm if I can just connect the relevent cables with scotch connectors to the RNS-E wiring loom? I am going to use this as a reference to connect the cables to the RNS-E Loom. CarSystems - Audi 8P0 862 335 S/AA WIRING DIAGRAM Thank You. |
|
|
|
|
|
#2 (permalink) |
|
Member
I drive A4/B6 3.0Q Sport
Joined: Apr 2008
From: Essex, UK
Posts: 31
|
I soldered and heat shrunk my cables for a 100% connection - not a fan of scotch connectors personally.
Link you give for connections looks spot on.
__________________
2001(51) A4 Saloon 3.0 Quattro Sport Tiptronic - Platinum Leather/Heated Front Seats/BOSE/DIS/Cruise Control Retrofits: GmBH Bumpers, F&R Ambient LEDS, Xenon 'Slimline Ballast' HID's & Headlight Washers, Auto-dipping Rear View Mirror, Footwell Lights, Vent Control illumination, ISO-Fix, Audi NAVPlus RNS-E & OEM BT + VIMhack + Video i-pod & Aux inputs, Rear PDC, Powerflow 100mm Tips. Reversing Camera Diagnostics:VCDS HEX+USB+CAN Cable |
|
|
|
|
|
#4 (permalink) |
|
Junior Member
I drive a4
Joined: May 2010
From: London
Posts: 11
|
Hi,
Following on from this, I need some more help here. After connecting everything I took the car to someone to code it. He said that the VAGCOM could not see the bluetooth when trying to tell the RNS-E that there was a bluetooth present. I have checked all connections again and they look fine. I have used this as a reference to connect the bluetooth to the RNS-E [IMG] [/IMG]D15 RED +12V D12 BLACK GND D9 ORANGE CAN H D10 BROWN CAN L B5 WHITE K-LINE D11 PINK MUTE C6 GREEN TEL NF IN - C12 BLUE TEL NF IN + Now here is what I have in the harness that came with the bluetooh. These are the cables I have: +12V GND CAN H CAN L MUTE TEL NF IN - TEL NF IN + As youu can see I don't have a cable that should be K-LINE My car is an A4 2002 (B6 I Think) Do I need that cable? Thanks. Anne. Last edited by intelz; 08-01-2010 at 12:59 PM.. |
|
|
|
|
|
#5 (permalink) |
|
Super Moderator
I drive 2006 RS4 Avant
Joined: Mar 2005
From: Hampshire, U.K.
Posts: 9,294
|
If your RNS-E can be seen by VAG-COM then there is a K-line connection - since the A4 (yes yours is a B6) only uses K-line for diagnostics.
__________________
06 RS4 Avant - Phantom Black 2010 EU RNS-E 8P0 035 193 C with A4 faceplate - with SDS (HW 070, SW 0150) - coded 309723 16GB SDHC card + CD changer and AMI ready to be fitted BT 8P0 862 335 M - coded 10702 paired with HTC TyTN II (WM6.1) Instruments ch 62 = 23 VCDS (VAG-COM) 908 + HEX-COM+CAN |
|
|
|
|
|
#7 (permalink) |
|
Member
I drive A4/B6 3.0Q Sport
Joined: Apr 2008
From: Essex, UK
Posts: 31
|
You need to make sure you have a K-line connection from the RNS-E (B5) to the BT unit, else it will not be seen from VCDS,/VAG-COM.
I believe you are saying your BT loom did not include a K-line connection as there are only 7 wires in your supplied loom - you need 8 including the K-line.
__________________
2001(51) A4 Saloon 3.0 Quattro Sport Tiptronic - Platinum Leather/Heated Front Seats/BOSE/DIS/Cruise Control Retrofits: GmBH Bumpers, F&R Ambient LEDS, Xenon 'Slimline Ballast' HID's & Headlight Washers, Auto-dipping Rear View Mirror, Footwell Lights, Vent Control illumination, ISO-Fix, Audi NAVPlus RNS-E & OEM BT + VIMhack + Video i-pod & Aux inputs, Rear PDC, Powerflow 100mm Tips. Reversing Camera Diagnostics:VCDS HEX+USB+CAN Cable |
|
|
|
|
|
#8 (permalink) |
|
Junior Member
I drive a4
Joined: May 2010
From: London
Posts: 11
|
Hi Woorlord,
Thank you for your reply. Do you know which pin Number this K-LINE would go into the Bluetooth end? I know where it would on the RNS-E end. The guy that was doing the coding has sent me this by Email: To be fair to him he does have a genuine Ross-Tech cable but has only ever done any type of coding to his own Skoda. "I just felt bad I hadn't been able to code it in. I had no comms with can gateway, radio/rns-e or Bluetooth. Other modules were fine, eg engine. Did a scan for trouble codes but nothing of interest came up, will forward on the scan file when I'm on the computer later." Thanks once again. Anne Last edited by intelz; 08-01-2010 at 02:16 PM.. |
|
|
|
|
|
#9 (permalink) |
|
Member
I drive A4/B6 3.0Q Sport
Joined: Apr 2008
From: Essex, UK
Posts: 31
|
BT K-line in on Pin 15 of BT plug.
__________________
2001(51) A4 Saloon 3.0 Quattro Sport Tiptronic - Platinum Leather/Heated Front Seats/BOSE/DIS/Cruise Control Retrofits: GmBH Bumpers, F&R Ambient LEDS, Xenon 'Slimline Ballast' HID's & Headlight Washers, Auto-dipping Rear View Mirror, Footwell Lights, Vent Control illumination, ISO-Fix, Audi NAVPlus RNS-E & OEM BT + VIMhack + Video i-pod & Aux inputs, Rear PDC, Powerflow 100mm Tips. Reversing Camera Diagnostics:VCDS HEX+USB+CAN Cable |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| C5 OEM Bluetooth install without RNS-E | pokrovsky | Multimedia | 0 | 11-16-2009 01:33 PM |
| Bluetooth Install A4-B7 | sarchila | Multimedia | 20 | 05-19-2009 11:23 AM |
| a3p bluetooth install | vinceemmery | RNS-E | 8 | 09-20-2008 03:41 AM |
| Install Bluetooth before RNS-E (with red DIS) | copperbeech1 | RNS-E | 6 | 06-30-2008 08:01 AM |
| Bluetooth install | Ponch | RNS-E | 22 | 09-06-2006 10:15 PM |
|
|