|
|
02-06-2010, 01:26 PM
|
#601 (permalink) |
|
Junior Member
I drive A4 Avant S-Line Quattro Special Edition 2006
Joined: Feb 2010
From: UK
Posts: 1
|
This may sound a bit hollow but I would just like to give my genuine thanks to the hosts of this forum for entertaining this discussion and all the kind folks who took the time to provide very helpful information. There are a lot of posts elsewhere that I have fished through (and I do mean a lot!!) that really are incomplete and throw out red herrings.
After aquiring an old Dell, a Pio drive off eBay and creating dozens of Verbatim coasters I have finally cracked it for me. To confirm (using Maloushe's report format): Drive: Pioneer DVD-RW DVR-111D flashed with default Pioneer 1.29 firmware (wasted a lot of time reading about custom stuff) Media: Verbatim DVD+R DL 8x Software: Alcohol 120% Write speed: 4x Write method: DVD DAO View -> Options -> Recording -> Book Type DVD+R/DVD+RW disc as DVD-ROM while burning (ticked) View -> Options -> Recording -> Buffer set to 90Mb The biggest issue I had was with it locking at the layer switch, I thought I'd play it safe and always burn at the lowest setting (2.4x). This for me was wrong and seemingly, the cause of a lot coster creation!! I hope this helps someone, keep up the excellent work folks. Edit: Oh and if anyone wants any help (I'll do my best!) relating to this DVD drive PM me and I will try and help. I will post up any potentially useful responses I give into this thread. Last edited by WBRacing; 02-06-2010 at 01:31 PM.. |
|
|
|
02-10-2010, 03:34 AM
|
#602 (permalink) |
|
Member
I drive A3 2007 2.0TFSI
Joined: Aug 2008
From: Romania, Bucharest
Posts: 98
|
So I managed to make a working copy on a single layer DVD! Previously had a Pioneer 116D and flashed it to 116L with 1.09 firmware. The 1.09 firmware was modified with MCSE (be careful that this could brick your dvd writer) to accept bitsetting, rpc-1 (region free) and lower writing speed (2.4x).
I used a Verbatim DVD+R with Alcohol 120% and 2.4x with success. All the credits goes to and801, who helped with great directions! Thanks again! |
|
|
|
|
02-12-2010, 02:02 AM
|
#603 (permalink) | |
|
Junior Member
I drive 2004
Joined: Feb 2010
From: Greece
Posts: 1
|
LiteOn change BooKtype with ImagBurn
Quote:
iHAS124 A BL0P (ATA) Current Profile: DVD+R Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2.139.584 Size: 4.381.868.032 bytes Time: 475:29:59 (MM:SS:FF) Supported Write Speeds: 6x; 8x; 12x; 16x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2139583) -> LeadOut (LBA: 2139584) Disc Control Blocks Information: ATAPI Physical Format Information (ADIP): Disc ID: MCC-004-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: MCC-004-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 |
|
|
|
|
|
03-05-2010, 01:30 PM
|
#604 (permalink) | |
|
Junior Member
I drive A4 Avant 2005
Joined: Mar 2010
From: Netherlands
Posts: 2
|
Ok, here is my problem:
I have a pioneer burner 116D. Previously used in a computer with Windows Vista 32 bit, and firmware 1.06 (original). I have used it to burn a succesfull copy several times. Mostly using ImgBurn. Now I changed computer to a i7 and I am unable to produce the same result. Windows 7 64 bit, I upgraded the firmware to 1.09 (original). I can see that the result is different too. The lines in the layer seem less dense (I can see lines) then before. Has anybody produced a working copy on windows 7 64 bit? or is there another issue going on? If more info is needed let me know. Quote:
Last edited by seabird; 03-05-2010 at 02:05 PM.. Reason: imgburn logs added |
|
|
|
|
|
03-05-2010, 02:21 PM
|
#605 (permalink) | ||
|
Junior Member
I drive A4 Avant 2005
Joined: Mar 2010
From: Netherlands
Posts: 2
|
sorry about my too quick assumption. got dvdinfo to work at the 2 copies. 1 working (burned with old computer, one new. Only the old one is working:
The new, NON WORKING COPY Quote:
Quote:
|
||
|
|
|
|
Yesterday, 12:11 PM
|
#606 (permalink) |
|
Junior Member
Joined: Apr 2008
Posts: 2
|
For the Snow Leopard people out there... Said files (cue/bin) from the location that shall not be named can be made to work in the following fashion:
Macbook Pro w/ Snow Leopard Roxio's Toast 10 (which can also be had from the location that shall not be named) Dual Layer Memorex DVD +R disc Open the copy disc tab, choose burn from image, locate the .bin file then click the burn button. I didn't have to worry about the DVD Book setting. Software updates twice in the car and the maps load afterward. Thanks for all the help and information. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| will this be all i need to make my 4b0 work | tonelee1316 | CD Navigation Plus | 0 | 04-21-2007 09:44 AM |
| MAking a Backup of the CD Map Disk | blackheathen | Maps & Firmware | 0 | 04-10-2007 12:50 PM |
| Any chance new US Nav DVD will make... | teambritten | RNS-E | 0 | 11-14-2005 03:33 AM |
| if i attempt to make a backup dvd would i ruin the unit? | rstdellz | Maps & Firmware | 4 | 09-14-2005 09:00 AM |
| help to backup my euro dvd map disk | dunk | Maps & Firmware | 6 | 06-03-2005 11:58 AM |
|
|
Linear Mode
