Borys182

back black conector to module (not module)
pin 13 black/white - system to maintain speed "off" the engine driver j623 (propably don't need it crouse control I think)
pin 17 black terminal 15 to electrical car driver j519 I think I can connect it to 12V after ignition not sure
pin 18 red/black terminal 50 to electrical car driver j519 - lack of ideas




Adding picture to be sure.
Where is the L-bus and +30 supply in a yellow circle? In the slip ring it's pin 9 and 10 but in module I'm not 100% sure. don't have a slip ring to check it

uks3rnse8L where r u? You done it mate Can u help me?

Borys182

anyone??

i foud i google that:
pin 13 is for cruise control locked off dont need it
pin 17 is terminal 15 but is the output so propably dont have to connect it
pin 18 terminal 50 output as well for starter motor

So everythink what I need is L-bus pin 9 which one is it in the module?
Can sameone check it for me by multimiter pls

Borys182

I think that I connected all correctly.
buttons illuminates when I turn the light on. Also operates the dimming and brightening, but the buttons control does not work. Coded the rns-e for MFSW "5" on the end.
It seems to me that the module needs to be coded. But why? I bought used one for exactly same steering wheel so should be coded. How can I do it? There is no k-line. Cant do it in my car

Borys182

finally everything works

Il Signor Zetec

What did you do???

__________________
http://img.photobucket.com/albums/v2...irma_atina.jpg
Audi S3 8L MY 2001 AMK: white Recaros, GRA tempomat, RNS-E, TT pedals, S3 mats, turbo gauge, K&N panel filter

Borys182

Because multifuncion works after ignition I conected +12 suply into ignition socket in the module and everything started working
Module only neeed CAN H and L, guand and 12 volts (back side of module)
and L-bus, 12 volts to steering wheel (front side of module)
and 12 volt to igniton socket

Il Signor Zetec

So did you use a A6 or A3 8p module?
I want to do this work and I just have the RNS-E
I don't understand where I must connect this cable on the module...please can you explain the connections through a photo???
Thank you!

__________________
http://img.photobucket.com/albums/v2...irma_atina.jpg
Audi S3 8L MY 2001 AMK: white Recaros, GRA tempomat, RNS-E, TT pedals, S3 mats, turbo gauge, K&N panel filter

Borys182

I used audi a3 8p module with F on the end.

+ 12v after ignition streight to steering wheel what u cant see on the photo